CNC is computer data control machining. CNC machining is an advanced machining skill in modern machining with high efficiency and precision. CNC machining skills can deal with chaotic, fine, and small batch changeable machining problems like molds and meet the needs of modern production. To accelerate the economic development of our country, CNC machining is an indispensable skill in modern production.
Aluminum profile CNC machining technology is a kind of machine that abides by machining cutting rules, which are generally the same as machine tools. Because it is an automated machine that applies computer control skills to machining, it has high machining efficiency and advanced precision, while the process is messier, and the schedule is more detailed and meticulous.
The CNC machining process includes the selection of tools, the determination of cutting parameters, and the planning of the process road. The CNC machining process is the root and center of CNC programming, as long as the process is reasonable, can compile high-efficiency and high-quality CNC programs. CNC procedures are measured by minimum machining time, minimum tool loss, and the workpiece that works best.
The CNC machining process is part of the whole process of the workpiece, and even a process. It must work with other front and rear processes to meet the installation requirements of all machines or molds so that qualified parts can be machined. The CNC process is generally divided into roughing, middle roughing, semi-finishing, and finishing. Roughing should choose a larger knife as much as possible and quickly remove a large amount of workpiece material within the machine tool power or tool acceptable range. To avoid the cutting concussion during roughing that loosens the workpiece, you should check the table in time after opening the thickness and, if necessary, turn the knife from the beginning. A finishing light knife that can be used as a datum after coarseness is opened to prepare for future checklist viewing. For workpieces with a miscellaneous cavity, because a larger tool is used for coarseness, leaving a large margin in the corner, secondary coarseness or clearing must be done with a tool smaller than that used for coarsening. In the case of large machining areas, semi-finishing is possible to reduce tool loss. To avoid overheating, the above steps must leave enough room for the finishing process. Under normal circumstances, try to check on the machine tool, after passing before removing it, then prepare the next machining.
Guangdong Zhonglian Aluminum kept helping develop tailor-made products to meet customers’ unique demands, especially those that require CNC hole punching, screwing, milling, precision cutting, piece powder coating, and anodizing. Any questions, please contact us freely.
